Romanian Belt Sticker 1

1200 mm x 180 mm

2 - 4 days

It can be easily removed from the wall without leaving any marks as long as the plaster is of good quality - this can be easily tested with a piece of paper tape or the small sticker offered. The testing sample can be found next to the wall sticker, in the box.

Application steps:

1. Position the sticker on the wall, fix it with paper tape (in the middle) and apply it using a squeegee;
2. Peel off the sticker transfer foil half way and remove the paper layer;
3. Starting applying from the middle using a squeegee, so there will be no air bubbles;
4. Repeat steps 2 and 3 for the second half of the sticker;
5. Slowly peel off the transfer foil, making sure the sticker has adhered to the desired surface.

* the instructions will also be found on the sticker box, accompanied by the assembly diagram.

Black/Red